This site uses cookies to provide you with a great user experience and to show you relevant ads. If you’re OK with that, just continue. To find out more, please review our privacy policy.
#P530
Stage6 Sport PRO variator kit.
This variator comes pre-adjusted and optimised for use with either a standard 50cc or 70cc sport cylinder with aftermarket sports exhaust fitted.
It has however been developed and optimised for use with 70cc sport cylinders.
The back of the variator and the roller tracks are hard coated, the running surface is uncoated. This reduces the running surface's lifespan whilst at the same time increased friction coefficients result in better performance. Furthermore, the coating cannot flake off, as it may happen with hardcoated running surfaces, which would lead to quicker wear or even breaking of the drive belt.
Included in this kit are the variator with bushing, back plate with low-friction coating, shims, a set of roller weights (16x13) and a torque spring.
Torque spring: medium
Roller weights: 16x13mm - 6.25g
Stage6 S6-5814002
The shims are to set the spacing as shown here.
This will also help the belt sit lower in the pulleys, this will aid take off.
Yes it does. And the black spacer replaces the standard spacer at the back of the variator between the back plate and oil pump cog. The 2 small washers fit between the front pulley and the variator boss. They act as spacers and can help the pull away.
As soon as we get new stock for Stage6 Sport PRO Variator - Piaggio, we'll send you an email.
