This site uses cookies to provide you with a great user experience and to show you relevant ads. If you’re OK with that, just continue. To find out more, please review our privacy policy.

TNT Racing Crankshaft- Aerox/ Minarelli Horizontal



TNT Racing crankshaft for Yamaha Aerox 50cc scooters with Minarelli 2-stroke engines with 10mm gudgeon pins.

Full circle racing crankshaft is up-rated for better gas flow and primary compression. This crankshaft is suitable for standard and low revving sport 70cc cylinder kits.

Includes small end bearing (10mm). 

  • Malaguti 50cc F10,F12,F15
  • Malaguti 50cc F12 after 2007
  • MBK Nitro 50
  • Yamaha Aerox 50
  • Yamaha Jog R/RR
  • Yamaha Neos 50 (2-stroke)
  • Q. What are the benefits of a full mass crank on a 70 cc big bore kit?
  • A.

    A full circle crank occupies more space within the engine and therefore increases the primary compression (this is the compression when the piston is on it's down-stroke and the bottom of the piston is compressing the fuel mixture against the reed valves before the piston travels down far enough for it to enter the combustion area). This is simply because there is less empty space in the engine bottom end.
    In reality you will not see much noticeable performance increase unless the engine is highly tuned. However because these cranks are designed to be used on highly tuned engines they tend to be much stronger than other cranks.