This site uses cookies to provide you with a great user experience and to show you relevant ads. If you’re OK with that, just continue. To find out more, please review our privacy policy.

Manual Choke Lever Conversion- PHVA

Manual Choke Lever Conversion- PHVA

#P286

£5.65
Add to Basket
Description

Manual choke lever conversion kit for Dellorto PHVA type carburettors. Also suitable for Gurtner carbs.

Fits virtually all carbs where the autochoke is fitted with a 2 bolt horse shoe type clip including virtually all Aerox, Piaggio, Peugeot 50cc mopeds.
Converts from automatic choke to manual

To fit a manual cable conversion you will need this kit.

Brass insert: 7mm diameter

Plastic: 14mm Inner diameter

Plastic: 19.8mm outer diameter

Fitment
  • This item is not specific to any bike, check suitability first.
Spares
Question
  • Q. Can I use this to convert my automatic choke to manual on my Piaggio zip 17.5mm Dellorto carburettor?
  • A.

    Yes these fit the original carb fitted to Piaggio 50cc 2-stroke scooters.

  • Q. Is the choke on or off when it's facing down
  • A.

    The choke is off when the lever is horizontal as shown in the picture.

  • Q. Hi I've just ordered on of these conversion chokes but from the picture I can't see the needle is there. Should there be a needle like on my old auto-choke?
  • A.

    Hi, no- manual chokes like this are completely on or completely off hence no need for the needle as there are no mid-positions.
    On a performance engine you would normally warm up the bike and then switch off the choke completely before riding. A standard auto choke switches off slowly over a few minutes when you start riding the bike but this isn't ideal on more highly tuned engines.

  • Q. Hi does this work with gurtner carbs?
  • A.

    yes, it fits the Aerox gurtner carbs