Order by 3.30pm for dispatch today
6.8 Ohm Resistors
When fitting LED indicators original flasher units tend to not work properly.
An easy alternative to fitting a LED indicator relay is fitting a resistor. When wired in parallel these resistors restore the original flash rate. One resistor is required per side (2 required for 1 bike).
Supplied without the wire these resistors would require soldering when wiring in.
This resistance is correct for when you are replacing all your standard moped conventional bulbs (10 watts each) with LED indicators all round- fit one resistor to the left side and one to the right side (doesn't matter if you fit to the front or back LED indicator)
You will need x2 resistors to cover all 4 indicators.
As soon as we get new stock for 6.8 OHM Resistor - LED Indicators, we'll send you an email.