5 metre lengths of electrical wire for general purpose moped wiring.

Available in choice of three different colors (red/black/green).

Athena CDI/ HT coil for Piaggo/ Gilera engines.

No rev-limit, standard Piaggio CDI's are restricted to 10,000rpm.

If your CDI connects to the loom with a block connector (most peds do) you will need to cut this off and fit spade connectors to the individual wires.

Universal Automatic Choke Unit

Replacement automatic electronic choke unit for most 50cc scooters/ mopeds.

Fits: Piaggio/ Aerox, Minarelli, Peugeot etc. and Chinese 4-stroke mopeds

In order to protect your scooters electric components, most electric circuits are equipped with a fuse!
If too much current flows, a metal wire or strip inside the fuse melts, which interrupts the circuit to prevent further damage.

Before ordering, please check which fuse you need. If you have no original fuse, you can find out what you need by...

Brake light switch for Piaggio, Gilera, Peugeot, Yamaha bikes.

70 piece bullet/ spade general purpose connectors kit from Motoforce for all you scooter electrical connections !
Incorporates the 7 most popular connectors. Use with crimp pliers (see 'spare parts' tab)Motoforce Part No. MF01.120

Bargain replacement part from Motoforce for missing or faulty chokes, suitable for all 12mm, 17.5mm and 22mm PHVA and PHVB Dellorto carbs.

An excellent alternative to the rather expensive OEM parts.

*Check photo with your own before ordering.Motoforce Part No. MF16.30006

In scooter racing, mechanical water pumps often get replaced with electrical models to reduce the rotating mass at the crankshaft, which results in better throttle response and a slight increase in performance. Another situation where electrical water pumps come in handy is when cylinders in air-cooled engines are replaced with liquid-cooled...

For use when you have fitted LED indicators.

LED indicators use much less power than regular bulbs and can cause the flasher unit to not work correctly when upgrading to LED's. You will need 1 kit per pair of indicators.