Genuine Yamaha water pipe clips for Yamaha Aerox/ Minarelli liquid cooled mopeds.

These are the little clips which secure the tiny heating...

Temperature sensor for liquid cooled Minarelli engines.
The long one is just a switch (for Aerox with just a temperature light)
The...

Yamaha Aerox water coolant pipe.
This pipe is the lower waterpump pipe which goes to the bottom of the radiator.
Genuine Yamaha moped part so...

Aerox Water Pump

Very high quality (metal) water pump cover, The meshed design makes this cover a must have tuning part !!

*This waterpump...

Water pump complete repair kit Yamaha Aerox / Minarelli 50cc.

*Always use coolant in your bike or the life of your waterpump will be...

STR8 Aerox water pump cover comes with impeller and waterpump assembly installed and lets you show what's inside your engine.
The big...

Aerox Water Pump Repair Kit- Aerox Waterpump Repair

Water pump repair kit for Yamaha Aerox / Minarelli

Note: you must use coolant and not ...

This is a terminal/ block connector for use with our Bosch 12v water pump.

Genuine Yamaha replacement water heater pipe for Yamaha Aerox/ Minarelli engines.

These are the little pipes which connect from the top of...

120cm long cooling hose/ water pipe. Fits most scooters.

90° bend both ends on 120cm version, single bend on 60cm version.

Internal...

Galp is a high quality cooling liquid which guarantees protection from corrosion, calcification, overheating and freezing temperatures of...

Waterpump seal for Yamaha Aerox/ Minarelli engines.

The aftermarket one addtionally includes the cover o-ring gasket

This is a special highlight from racing: a quick release hose coupling that allows you to remove the engine without water loss.
This is...

Oversize cooling fan from Motoforce Racing available for Sym/ Kymco 4-stroke and all Chinese 4-stroke GY6 type engines. This fan circulates...

The Motoforce Racing fuel filter is equipped with a sturdy metal housing and a sintered bronze ball filter element.
These filters have...

Naraku carbon finish cooling fan for 4-stroke GY6 and 139QMB/QMA Chinese mopeds e.g. Baotian and Kymco 50cc scooters.

Also Peugeot ...

Inexpensive replacement oil pump from Motoforce with the same capacity as the original.
Comes pre-primed and with all hoses necessary for...

Coloured, oversized engine cooling fan for Minarelli horizontal engines, this fits Yamaha Jog, Neos etc. and most of the common Chinese...

Peugeot Speedfight water pump cover.

*Supplied with the full water pump already installed.

Genuine Piaggio replacement fan for Piaggio/ Gilera air cooled bikes.

Replacement plastic thermostat cover kit for Piaggio Malossi L/C cylinder kits.

Stainless steel CNC water pump overhaul kit for Piaggio 50cc LC moped engines.
This is a great upgrade over the standard unit and has been...

Water pipe which locates by the engine flywheel/ stator.

Fits Piaggio/ Gilera water-cooled engines

Piaggio and Gilera water pump repair kit.

Thermostat for Piaggio/ Gilera L/C engines

High quality heavy duty water coolant radiator hose for mopeds.
(Made in Italy)

Universal fitting. Internal diameter 18mm, external diameter...

Not only is this SSP water pump a real eye-catcher, it also provides state-of-the-art technology. The water pump is precisely CNC machined...

Stage6 temperature sensor for Peugeot Speedfight LC engines. Compatible with Stage6 and Koso temperature gauge or any other gauge...

If you want to cool your engine down without having to install a second radiator, this flow cooler could be what you need.
Thanks...

Complete water pump repair kit for Suzuki Katana.
Includes wheel, shaft, bearings, seals, impeller etc., everything you could need ! 

Cylinder head water caps for Yamaha Aerox/ Minarelli Malossi cylinders.

Standard Aerox has 2 small pipes running from the cylinder head to...

Hose clamps from Motoforce, ideal for scooter water pipes!

22mm, 32mm available.

Water pump retaining circlip for Piaggio/ Gilera 50cc engines.

Replacement water pump drive wheel for Yamaha Aerox/ Minarelli engines.

Radiator for Yamaha Aerox/ MBK Nitro.

195mm(width) x 205mm(height) x 35mmMotoforce Part No. MF29.505

Thermostat for Yamaha Aerox/ Minarelli liquid cooled engines.

Made in Italy.

Replacement water tank/ reservoir bottle for Yamaha Aerox/ MBK Nitro.

Genuine Water tank cap for Yamaha Aerox - also fits Piaggio