PedParts UK

Free Shipping on all orders over £59.99 (Mainland UK only)

0 items0.00

Checkout

New Parts


Results

Kickstart pinion gear for Piaggio/ Gilera 125-180cc 2-stroke engines.

Pay: £11.65

In Stock

InfoMore Info

RMS

Rubber mirror hole blanking cover/ cap for Piaggio/ Gilera scooters.

For 22mm (approx) hole diameter.

Pay: £0.45

In Stock

InfoMore Info

RMS

Crankshaft/ variator/ clutch nut for Aprilia, Gilera, Piaggio, Vespa 125-200cc maxiscooters and motorcycles.

M12 x 1.25mm

Includes captive...

Pay: £0.95

In Stock

InfoMore Info

RMS

Spark plug cap for Piaggio 4-stroke scooters.

90 degree.

Suitable for the spark plug tip shown in the photo.

Pay: £4.85

In Stock

InfoMore Info

Inlet manifold gasket for Piaggio 50cc 4-stroke 2-valve engines.

Dimensions:
21mm ID,
46mm (approx) distance between the hole centres,
1.7mm...

Pay: £1.15

In Stock

InfoMore Info

Orange side panel reflector for Gilera/ Piaggio/ Vespa.

Be seen when pulling out of side roads, replace your lost or damaged...

Pay: £2.95

In Stock

InfoMore Info

Flat exhaust gasket for Minarelli 50cc 2-stroke engines.

These are designed to work with Minarelli horizontal engines where the exhaust can...

Pay: £0.75

In Stock

InfoMore Info

DMP

Polini 28mm flat slide racing carb with manual pull choke.

Cast in light alloy. Their peculiarity consists in having a flat slide made of...

Pay: £75.25

In Stock

InfoMore Info

Polini

Polini 26mm flat slide racing carb with manual pull choke.

Cast in light alloy. Their peculiarity consists in having a flat slide made of...

Pay: £75.25

In Stock

InfoMore Info

Polini

Polini 24mm flat slide racing carb with manual pull choke.

Cast in light alloy. Their peculiarity consists in having a flat slide made of...

Pay: £75.25

In Stock

InfoMore Info

Polini

In-line fuse holder for blade type fuses.

Simply cut the wire you wish to fuse, use 2 female blade terminals and connect the fuse holder in...

Pay: £0.75

In Stock

InfoMore Info

DMP

Rubber rim band for 16-19 inch wheels.

Often replaced with insulation tape, rubber rim bands serve to protect your inner tube from the...

Pay: £0.95

In Stock

InfoMore Info

Polini rear brake shoes for Piaggio/ Gilera mopeds.

Fits most Piaggio/ Gilera models after 2000. If in doubt check your drum diameter,...

Pay: £11.95

In Stock

InfoMore Info

Polini

Red BA15S tail light bulbs.

12 Volt.
10 Watt.
Single filament.

Sold individually.

Pay: £0.65

In Stock

InfoMore Info

DMP

120 degree NGK spark plug cap for scooters 

Waterproof NGK spark plug resistor cover.
Maximum heat resistance.
Maximum voltage ...

Pay: £4.45

In Stock

InfoMore Info

NGK

Polini rear brake shoes for Yamaha & Peugeot scooters.

Size = 110x25mm.

Pay: £12.55

Out of stock

InfoMore Info

Polini

Zadi lock cover rivet for Vespa 50-200 smallframe/ largeframe and PX.

2.5 x 13.5mm.

Sold individually.

Pay: £1.10

In Stock

InfoMore Info

Gasket set for Athena 166cc cylinders for Honda CBR125R motorcycles.

Included:
head gasket, base gasket, chain tensioner cover gasket,...

Pay: £26.95

In Stock

InfoMore Info

Athena

Polini wavy brake disc for Piaggio/ Vespa scooters.

External diameter = 200mm
Internal diameter = 96mm
Thickness = 4mm
Fixing hole diameter = ...

Pay: £41.45

In Stock

InfoMore Info

Polini

Aluminium 40mm jack up/ riser from DMP.

These have a fairly universal fitment, please check dimensions and fitment.

Dimensions;
40mm rise,
M8...

Pay: £6.25

In Stock

InfoMore Info

DMP

Polini wavy floating brake disc for Piaggio/ Vespa scooters.

External diameter = 200mm
Internal diameter = 96mm
Thickness = 4mm
Fixing hole ...

Pay: £68.55

In Stock

InfoMore Info

Polini

Crystal clear tail/ brake light lens from DMP.

For Piaggio Zip scooters produced after 2000.

Pay: £3.95

In Stock

InfoMore Info

DMP

LED daytime running lights from DMP.

For Piaggio Zip scooters produced after 2000 with a SP front panel.

Designed for the DMP panels, the...

Pay: £17.95

In Stock

InfoMore Info

DMP

Polini 66cc cylinder kit for scooters using a Yamaha 50cc 4-stroke liquid-cooled engine. (Both euro 2 & 4 versions)

Increased capacity ...

Pay: £248.30

In Stock

InfoMore Info

Polini

Polini Corsa 70cc kit for Yamaha/ Minarelli horizontal air-cooled engines.

The Polini Corsa 70cc kit makes approx 25-30% more power than...

Pay: £164.35

In Stock

InfoMore Info

Polini

Polini Corsa 70cc cylinder kit for Yamaha air cooled vertical moped engines e.g. Yamaha BWS.

The Polini Corsa 70cc kit makes approx 25-30%...

Pay: £164.35

In Stock

InfoMore Info

Polini

Stage6 multi-piece engine mount/ subframe bush for Minarelli horizontal engines.

The multi-piece tube has been designed to increase...

Pay: £54.95

In Stock

InfoMore Info

Stage6

High quality 14mm silver small end bearing from Stage6 for many common engines.
The best bearings available on the market!

14mm (gudgeon ...

Pay: £18.15

In Stock

InfoMore Info

Stage6

Air bleed vent nipple screw for Stage6 MKII liquid-cooled cylinder kits.

Pay: £6.65

In Stock

InfoMore Info

Stage6

Gasket set for the Stage6 MKII cylinder kit for Minarelli Vertical engines.

Included:
head, base, reed and exhaust gasket.

Pay: £8.95

In Stock

InfoMore Info

Stage6

The R/T front pulley has been developed specifically for the Stage6 R/T oversize variator kit.

The pulley's angle has been adjusted to...

Pay: £29.95

In Stock

InfoMore Info

Stage6

Gasket set for the Stage6 R/T gear cover for scooters using Minarelli 50cc engines.

Viton O-ring type gaskets.

Includes main cover gasket...

Pay: £6.65

In Stock

InfoMore Info

Stage6

Stage6 tyre stickers allow you to customise the sidewalls of your tyres.

The special material is designed for tyres. A Special adhesive...

Pay: £2.65

In Stock

InfoMore Info

Stage6

Motoforce racing reed valve for scooters using Minarelli 2-stroke horizontal engines.

Aluminium reed block with vulcanised rubber to help...

Pay: £19.65

In Stock

InfoMore Info

Motoforce

Genuine Piaggio variator cover for maxiscooters using the Piaggio LEADER engine.

This cover protects the rolling nut and bearing.

Black...

Pay: £3.45

In Stock

InfoMore Info

Piaggio

Genuine Piaggio "VESPA" variator cover for maxiscooters using the Piaggio LEADER engine.

This cover protects the rolling nut and...

Pay: £11.85

In Stock

InfoMore Info

Piaggio

Genuine Piaggio CDI/ Coil for Vespa PX 125/ 150cc produced after 2011.

Pay: £37.65

In Stock

InfoMore Info

Piaggio

Genuine Piaggio carburettor access panel for Piaggio Zip 50-100cc scooters.

This panel is located in the bottom of the seat bucket and...

Pay: £12.95

In Stock

InfoMore Info

Piaggio

Genuine Piaggio CDI for maxiscooters with immobiliser.

Fitment:
Gilera Runner VX 125,
Piaggio Beverly 125, Hexagon GTX 125, X8, X9.
Vespa GT...

Pay: £89.95

In Stock

InfoMore Info

Piaggio

Genuine Piaggio ignition switch cover for Gilera/ Piaggio/ Vespa 50-200cc.

This cover prevents the ingress of water which can cause a...

Pay: £0.95

In Stock

InfoMore Info

Piaggio

Genuine Piaggio battery spacer for Piaggio Zip 50-100cc scooters.

Loose batteries can lead to shorts or worse, fire, this spacer fills the...

Pay: £2.95

In Stock

InfoMore Info

Piaggio

Genuine Piaggio battery cover panel for Piaggio Zip scooters.

Includes foam piece that holds your battery down.

Pay: £16.45

In Stock

InfoMore Info

Piaggio

Genuine Piaggio carburettor top throttle cable elbow for Piaggio/ Gilera/ Vespa 50-180cc 2-stroke scooters.

Suitable for Dellorto...

Pay: £1.95

In Stock

InfoMore Info

Piaggio

RMS brake light switch for Yamaha scooters.

Thread: M6 x 0.75mm.

Smaller type (10mm).

Pay: £2.45

In Stock

InfoMore Info

RMS

Genuine Yamaha axle/ spindle nut.

M12 x 1.25mm flanged self-locking nut.

Used for the subframe and front wheel axle on Yamaha Aerox...

Pay: £2.25

In Stock

InfoMore Info

Yamaha

Genuine Yamaha handlebar cover bracket for Yamaha Aerox scooters produced before 2013.

These little brackets attach the front and rear...

Pay: £4.45

In Stock

InfoMore Info

Yamaha

Genuine Yamaha body panel spire screw spring clips for self tapping screws

For Aerox and BWS but could be suitable for other...

Pay: £0.75

In Stock

InfoMore Info

Yamaha

Genuine Yamaha body panel screws.

For Aerox and BWS but would be suitable for other applications.

M5 x 12mm
M5 x 16mm

Sold individually.

From: £0.90

In Stock

InfoMore Info

Yamaha

RMS H3 55W halogen headlight bulbs.

Please compare your old bulb with the one shown in the photo.

Available in white (clear) or blue tinted.

From: £0.95

In Stock

InfoMore Info

RMS

RMS H4 60/55W halogen headlight bulbs.

Please compare your old bulb with the one shown in the photo.

Available in white (clear) or blue...

From: £1.95

In Stock

InfoMore Info

RMS

RMS HS1 35W halogen headlight bulbs.

Please compare your old bulb with the one shown in the photo.

Available in white (clear) or blue...

From: £1.65

In Stock

InfoMore Info

RMS

125cc aluminium cylinder kit for Yamaha maxi scooters & motorcycles.

Includes:
cylinder, piston kit, gasket set & valve stem...

Pay: £55.95

In Stock

InfoMore Info

TNT

50cc cylinder kit for Peugeot Speedfight 3 & 4 liquid cooled scooters.

This cylinder type is unique to the liquid cooled Speedfight...

Pay: £59.45

In Stock

InfoMore Info

TNT

Variator crank pulley/ drive face nut for Peugeot 50cc scooters.

This nut has a slightly smaller flange to allow the nut to fit into the ...

Pay: £0.45

In Stock

InfoMore Info

TNT

Lock set for Peugeot Ludix Blaster, Snake & Trend.

Included:
Ignition barrel/ switch, ignition bezel 2x sheer nuts, 2x keys & seat...

Pay: £24.95

In Stock

InfoMore Info

TNT

Speedo cable for Peugoet Ludix Classic/ One.

This cable has a screw at one end only, do not buy this if your cable has screws at both...

Pay: £5.95

In Stock

InfoMore Info

TNT

Replacement air filter element for Peugeot Ludix scooters.

Please compare the photo with your old filter.

Pay: £3.45

In Stock

InfoMore Info

TNT

Noend metal mesh racing air filters.

Classic high performance air filters suitable for PWK type and other carbs.

Approximate...

From: £8.95

In Stock

InfoMore Info

TNT

Easyboost transmission tool kit for TMAX 500-530cc maxiscooters.

This tool kit is essential for TMAX owners who need to remove and setup...

Pay: £84.95

In Stock

InfoMore Info

Carenzi gas shock absorber for Peugeot 50cc.

High power nitrogen filled gas shock absorber. The chrome damper features a continually...

Pay: £89.95

In Stock

InfoMore Info

TNT

Carenzi gas shock absorber for Piaggio/ Gilera 50cc.

High power nitrogen filled gas shock absorber. The chrome damper features a...

Pay: £99.95

In Stock

InfoMore Info

TNT

Carenzi gas shock absorber for Yamaha Aerox/ Neos 50cc.

High power nitrogen filled gas shock absorber. The chrome damper features a...

Pay: £89.95

In Stock

InfoMore Info

TNT

Replacement cylinder head for liquid cooled Stage6 MKII racing and sport pro cylinder kits for Aerox/ Minarelli engines.

This is only...

Pay: £48.65

In Stock

InfoMore Info

Stage6

Polini hi-speed variator kit for Honda NSC 50R & Vision 50cc fuel-injected scooters.

Ideal replacement for the expensive standard unit,...

Pay: £49.35

Out of stock

InfoMore Info

Polini

Polini maxi Hi-Speed variator kit for Yamaha Majesty & X-Max 400cc maxi scooters. 

A replacement performance variator from Polini ...

Pay: £140.55

In Stock

InfoMore Info

Polini

Polini variator kit for scooters using a Minarelli verical 50cc 2-stroke engine.

Ideal replacement for the expensive standard unit, but...

Pay: £45.35

In Stock

InfoMore Info

Polini

Polini 9 roller hi-speed variator kit for Piaggio/ Vespa scooters using the 250/300cc QUASAR engine or the 200cc LEADER engine.

Ideal...

Pay: £106.75

In Stock

InfoMore Info

Polini

Polini maxi 8 rollers variator kit for scooters using a Piaggio MASTER 400/ 500cc 4-stroke engine. For models after 2004.

A replacement ...

Pay: £142.95

In Stock

InfoMore Info

Polini

Polini variator kit for Honda Zoomer 50cc 4-stroke scooters.

Ideal replacement for the expensive standard unit, but with added extras. The...

Pay: £48.75

In Stock

InfoMore Info

Polini

Polini maxi hi-speed variator kit for Yamaha S-max 125cc scooters

Ideal replacement for the expensive standard unit, but with added extras....

Pay: £105.55

In Stock

InfoMore Info

Polini

Polini maxi hi-speed variator kit for Kymco scooters using a 125cc fuel injected 4-valve 4-stroke engine.

Ideal replacement for the...

Pay: £94.35

In Stock

InfoMore Info

Polini

Polini variator guides for Maxi Hi-speed variators.

Supplied as a set of 3.

Pay: £2.85

In Stock

InfoMore Info

Polini

Polini maxi hi-speed variator kit for Peugeot Jetforce 125cc scooters.

Ideal replacement for the expensive standard unit, but with added...

Pay: £96.45

In Stock

InfoMore Info

Polini

Polini maxi hi-speed variator kit for Piaggio/ Vespa scooters using the 125cc 4-stroke iGet 4-valve (Euro4) engine.

Ideal replacement for...

Pay: £98.35

In Stock

InfoMore Info

Polini

Polini Hi-Speed Evolution variator kit for scooters using a Minarelli vertical & horizontal 50cc 2-stroke engine.

This is Polini's high...

From: £55.95

In Stock

InfoMore Info

Polini

Polini Hi-Speed Evolution variator kit for scooters using a Piaggio 50cc 2-stroke engine.

This is Polini's high end variator kit for the...

From: £55.95

In Stock

InfoMore Info

Polini

Polini maxi Hi-Speed variator kit for Yamaha Tricity 125cc 3-wheeled maxi scooters. For models from 2014 to 2015.

A replacement performance ...

Pay: £96.45

In Stock

InfoMore Info

Polini

Polini maxi Hi-Speed variator kit for Yamaha Tmax 530cc maxi scooters. For models from 2012 to 2016.

A replacement performance variator ...

Pay: £164.95

In Stock

InfoMore Info

Polini

Polini standard drive belt for scooters using a Peugeot 50cc 2-stroke engine.

Size = 764 x 17 x 32mm.

Fits Speedfight, Ludix, Trekker,...

Pay: £14.95

Out of stock

InfoMore Info

Polini

Polini front variator pulley for scooters using a Minarelli 50cc 2-stroke engine.

*Supplied with star washer.

Pay: £20.85

In Stock

InfoMore Info

Polini

Polini torque springs with evo slider for Minarelli 50cc 2-stroke engines.

The evo slider helps stop the torque spring from binding when...

From: £8.65

In Stock

InfoMore Info

Polini

Polini torque springs with evo slider for Piaggio 50cc 2-stroke engines.

The evo slider helps stop the torque spring from binding when...

From: £10.85

In Stock

InfoMore Info

Polini

Polini torque springs with evo slider for Piaggio 50cc 2-stroke engines.

The evo slider helps stop the torque spring from binding when...

From: £8.65

In Stock

InfoMore Info

Polini

Polini torque springs for Aerox/ Minarelli 50cc 2-stroke engines.

55% strength increase.

Pay: £5.65

Out of stock

InfoMore Info

Polini

Polini torque springs for Piaggio 50cc 2-stroke engines.

Choose between either -8% or -30% strength decrease.

From: £6.35

In Stock

InfoMore Info

Polini

Polini torque springs for Peugeot, Honda and GY6 engines.

Choose between either 15% or 30% strength increase.

From: £6.35

In Stock

InfoMore Info

Polini

These roller sets from Polini are ideal for testing.

Each roller set contains 4 different weights. These sets are useful as a cost...

From: £14.95

In Stock

InfoMore Info

Polini

Universal brake and clutch lever grips from Polini in Blue.

Not only do they look great, the soft foam rubber also offers firm and...

Pay: £3.95

Out of stock

InfoMore Info

Polini

Polini PTFE seal kit for Polini Minimoto.

Supplied with 2x seals (15x24x5mm)

Pay: £11.95

In Stock

InfoMore Info

Polini

Polini PTFE seal kit for Minarelli AM6 50cc 2-stroke engines.

Ideal for race and standard set up scooters.

Supplied with 2x seals...

Pay: £13.95

In Stock

InfoMore Info

Polini

Polini PTFE seal kit for Minarelli horizontal & vertical 50cc 2-stroke engines.

Ideal for race and standard set up scooters.

Supplied...

Pay: £14.85

In Stock

InfoMore Info

Polini

Polini PTFE seal kit for Piaggio 50cc 2-stroke engines.

Ideal for race and standard set up scooters.

Supplied with 2x seals (18x28x7mm...

Pay: £11.95

In Stock

InfoMore Info

Polini

Polini C4 bearing and PTFE seal kit for Minarelli AM6 50cc 2-stroke engines.

Ideal for race and standard set up scooters.

Comes with 2x...

Pay: £27.45

In Stock

InfoMore Info

Polini

Polini C4 bearing and PTFE seal kit for Minarelli horizontal & vertical 50cc 2-stroke engines.

Ideal for race and standard set up...

Pay: £27.95

In Stock

InfoMore Info

Polini

330ml or 500ml can of drink.

For in-shop purchases only !

From: £0.70

In Stock

InfoMore Info

LeftRight