Derestricted Aerox CDI

Unlimited (derestricted) cdi unit for Yamaha Aerox/ Minarelli engines.
The standard cdi is restricted to approx...

Aerox CDI

Yamaha Aerox CDI

For Aerox, Neos '03 onwards models (6pin connector, check connector picture)
This CDI has no...

Genuine Athena derestricted performance CDI unit for Honda X8R mopeds.
The standard Honda X8R CDI is heavily rev restricted and is the...

This will restrict the revs of your engine to a preset limit determined by yourself and can therefore be used as a speed...

With scooters restricted via the CDI, it is possible to achieve higher RPMs and top speed by simply connecting a new ignition unit, such as...

Standard loose wire type coil for Piaggo/ Gilera engines at an absolute bargain price !

If your CDI connects to the loom with a...

Dellorto type oil pump controller for Peugeot, regulates the 2-stroke oil supply depending on engine rpm.
This is the 8 pin type which...

Derestricted cdi unit for Piaggio Zip 4 stroke mopeds. it includes a new HT lead and spark plug cap, and a programmable switch to change...

Adjustable CDI unit for Peugeot V-Clic scooters, this CDI unit is made by Motoforce Racing and fits V-Clic plus a few other Chinese...

With scooters restricted via the CDI, it is possible to achieve higher RPMs and top speed by simply connecting a new ignition unit, such as...

This ignition coil from Motoforce Racing nearly doubles the secondary voltage.

The standard ignition voltage of the original ignition coil...

With scooters restricted via the CDI, it is possible to achieve higher RPMs and top speed by simply connecting a new non-restricted...

Adjustable CDI unit for Chinese 4-stroke Qingqi engines mopeds such as Peugeot V-Clic.
This CDI is fully de-restricted and allows you to...

Naraku racing derestricted cdi unit for Baotian 50cc 4-stroke mopeds.
(no rev restriction)

*Note please check photo against your old cdi...

Naraku racing derestricted cdi unit for 4-stroke GY6 mopeds - fits virtually all Chinese 50cc, and 125cc scooters.
This CDI has no rev...

Naraku racing derestricted cdi unit for both 50cc and 125cc Kymco 4-stroke mopeds.

Single plug, 8 pins

*Note please check photo against...

Naraku racing derestricted cdi unit for Kymco and Sym 50cc 2-stroke mopeds with upright (vertical) engine.
This CDI has no rpm...

Naraku racing V.2 derestricted cdi unit for 50cc 4-stroke mopeds using the Qingqi engines such as Peugeot V-Clic.

This CDI has no rev...

Naraku tuning cdi unit for Peugeot, Kymco and Sym mopeds using a 50cc 2-stroke engine.

This fully derestricted CDI will remove the...

Peugeot coil and HT Lead.

Can also be used as a universal coil and will work with any CDI based ignition system.

Fits Speedfight, Trekker, ...

Genuine Piaggio 50cc & 100cc 4 stroke cdi and coil unit. 4 pin type.

Check photo with your old one before ordering !
If you need...

This rev limiter is a clever way to restrict your scooter. It engages a rev limiter automatically whenever the engine is turned off. To...

Ignition coil for Minarelli / Yamaha Aerox.

Indicator/ flasher relay. Available in 2 pin and 3 pin

LED indicators bulbs are much lower wattage than conventional bulbs. Consequently...

An easy alternative to installing an LED indicator relay, These resistors are simply connected in parallel to each indicator, creating...

Starter relays for almost all mopeds.

Choice of connector pin layout, check photos to select yours.

Universal heavy duty starter relay 150A.

This starter solenoid is fitted to virtually all Chinese scooters, motorbikes, quads etc.....

8-pin voltage regulator/ rectifier for Piaggio/ Gilera mopeds and scooters.

This is the 8 pin version which incorporates a built-in flasher...

Replacement stator plate for 4 stroke Piaggio Zip and Piaggio Fly mopeds, will fit both 50cc and 100cc.

Replacement stator plate for almost all 50cc Chinese 2-stroke mopeds, quads and CPI scooters.

*Please check photo against your own before...

Regulator for Minarelli engines. Yamaha Aerox up to 2003
Check picture, some mopeds after '03 use this regulator instead.

Artek inner rotor ignition kit for Aerox/ Minarelli engines 2004 on.

These are one of the few kits which have a built in 60w lighting kit...

Artek K1 inner rotor kit for Piaggio mopeds, this is a complete kit with a built in 60W lighting coil.

Perfect for use with 50cc and 70cc...

Complete flywheel and stator plate assembly for 50cc Chinese 4-stroke mopeds.
This fits virtually all modern (GY6 type) Chinese 4-sroke...

MVT Premium ignition inner rotor kit for Yamaha Aerox.

This is one of the most advanced kits on the market and is the first proper on road...

Replacement starter motor for Peugeot Speedfight 100cc scooters.

Will also fit Vivacity 100 (up to 2008) and Peugeot Trekker 100cc scooters.

Replacement stator plate for Peugeot mopeds with vertical engine e.g. Speedfight 1,2, Vivacity (up to '08) and Trekker 50cc.

This fits...

12v regulator/ rectifier unit.

Fits Piaggio Zip 50cc up to 2000 and all Piaggio Typhoon 50cc, 80cc.

Motoforce replacement stator assembly for Piaggio purejet mopeds.
This will fit all the Piaggio 50cc fuel injected moped engines including...

Short wire type (fits later Piaggio/ Gilera engines) check photo.

Replacement voltage regulator/ rectifier unit for Piaggio Zip 50cc. Incorporates built in flasher unit.

Also fits Zip 100cc.

Replacement Regulator for Peugeot, Sym and Kymco scooters.

Check pic before ordering!

Regulator unit for Yamaha Aerox/ Minarelli engine mopeds. This regulator has a 4 pin connector and fits most versions up to 2003.

Check ...

With PVL, Stage6 have managed to find a distinguished and competent partner to develop and manufacture there ignition. PVL has supplied...

Replacement stator assembly for 4-Stroke 125cc GY6 type engine scooters.
(152QMI engines)

Check the wiring connectors in the pic.

Temperature sensor for liquid cooled Minarelli engines.
The long one is just a switch (for Aerox with just a temperature light)
The...

Replacement digital speedo sensor for Aprilia SR50 mopeds with Piaggio engine ('04 onwards)

Please check against your old one before...

These temperature sensors allow measurement of the cylinder temperature of air-cooled engines using the Stage6 Rev Counter & ...

Air cooled temperature sensor for the Stage6 Rev Counter & Temperature Gauge Clocks or any custom application of your own.
Includes...

Engine temperature sensor for Piaggio/ Gilera engines.
Thread M10x1.0mm

approx resistances:
20deg = 2,500 ohm
40deg = 1,300 ohm
75deg = 380...

Stage6 temperature sensor for Yamaha Aerox/ Minarelli engines. This is a replacement sensor which works with the Stage6 and Koso...

Stage6 temperature sensor for Piaggio cylinder heads. Fits both Stage6 and Koso temperature gauge. M10 x 1.0Stage6 Part No. S6-4030ET02

Short temperature sensor for Yamaha Aerox/ Minarelli liquid cooled engines.

This sensor is M10 with tapered 1/8 pitch (use PTFE tape and...

High quality automatic choke unit for 4-stroke made-in-China mopeds.

Fits Piaggio 50cc 4-strokes and all Chinese 4-stroke mopeds both 50cc...

Universal Automatic Choke Unit

Replacement automatic electronic choke unit for most 50cc scooters/ mopeds.

Fits: Piaggio/ Aerox, Minarelli,...

Bargain replacement part from Motoforce for missing or faulty chokes, suitable for all 12mm, 17.5mm and 22mm PHVA and PHVB Dellorto...

Replacement auto choke unit for Dellorto carbs, U Clip type.

This will suitable all 12mm, 17.5mm and 22mm PHVA and PHVB DellOrto carbs and...

Universal on/ off SPDT toggle switch with cover and LED on/off indicator light.

For use with any custom application which requires an on/...

High-gloss aluminium pilot-style switch panel equipped with 2 control lamps, push button, toggle switch and toggle switch with cover.

Can...

Brake light switch and cable for most Chinese rear drum brakes.

Fits a large range of 2-stroke and 4-stroke Chinese scooters (check yours...

Front brake light switch for most Chinese 4-stroke scooters both 50cc and 125cc.

This fits the most common Chinese scooters but check the...

Genuine Piaggio/ Gilera indicator switch.

Suitable for Aerox front or rear brake

High quality replacement left hand switch gear for Yamaha Aerox/ Jog mopeds.

8 pin switch for your horn, indicators and headlight high/ low...

On/ off general purpose 2-way toggle switch, can be mounted into the fairings and clamped into place with the small nut.Motoforce Part No. ...

Genuine Piaggio/ Gilera high and low beam switch.
Mounts into the front handlebar panel. 

Additionally fits all Runner 125 2 stroke and...

Unlike most lanyards this kill switch from Scooter Attack features a magnetically attached switch which is very easily removed and...

TNT Tuning lanyard kill switch.

This is ideal for race scooters. Attach it to yourself and it will of course kill the engine as soon as the...

TNT Tuning switch gear. If your going to convert from your stock bars to downhill ones then this is the kit for you.

Controls:
On /...

Right hand side TNT switch gear for Yamaha Aerox/ Mbk Nitro.

High quality Motoforce racing HT lead.Motoforce Part No. MF12.00005

7.5mm diameter Naraku HT cable.

This is sold in 1 metre lengths and comes in a bright racing orange colour.

Waterproof NGK spark plug resistor cover.
Maximum heat resistance.
Maximum voltage resistance.

NGK spark plugs. Select the sparkplug you want from the drop down box above.

High quality replacement red rubber spark plug cap for liquid cooled mopeds - universal fitting.

For full waterproofing loop a small cable...

Fits almost everything air-cooled.

Suitable for the spark plug tip shown in the photo (or just unscrew the spark plug tip from...

Selection of high quality Motoforce spark plug caps.
All connectors have a 90° angle and are made of rubber or plastic.Motoforce Part ...

TNT Tuning HT cable. Universal 530mm long

5 metre lengths of electrical wire for general purpose moped wiring.

Available in choice of three different colors ...

In order to protect your scooters electric components, most electric circuits are equipped with a fuse!
If too much current flows, a metal...

Inline fuse holder with fuse, Comes with spare 15A fuse.

Motoforce inline fuse holder.
Any new circuits or electrical devices you connect to your moped must be connected through a fuse in order to...

These Motoforce connectors are a handy and tidy solution for all custom electrical work on your scoot.
No matter whether you want to modify...

Lithium 4L-BS battery, this is a very high quality low maintenance long lasting sealed battery.
Can be recharged to 90% capacity in just 6...

LUCAS Moped Battery - All scooter batteries are either supplied with an acid pack or are pre-filled and sealed.

We have tried a large...

Oxford essential battery charger/ optimiser for 12v batteries.

Recovers deeply discharged batteries.

Automatically assesses and...

6v/12v Scooter Battery charger.

Comes with Crocodile clips and Battery terminal connectors.

High quality branded replacement starter motor.

Fits Aerox/ Minarelli engines.

Replacement starter motor for 125cc Chinese 4-stroke scooters.

This fits 152QMI engines and comes complete with wiring.

Replacement Piaggio/ Peugeot starter moter. Fits most Piaggio/ Gilera/ Peugeot models including Zip, NRG, Stalker, Typhoon,...

Starter motor unit and cable for all Chinese 50cc 4-stroke mopeds (GY6).

Fits 139QMB, 139QMA engines.

Also fits Peugeot V-Clic, Vivacity...

Replacement starter motor for Suzuki Katana, Aprilia SR50 (with Katana engine).

Will also fit Derbi Predator and Italjet Formula.

Replacement starter motor for Aprilia (2000-2003 with Katana engine) and Suzuki Katana.Motoforce Part No. MF90.190

Motoforce brings you this 12V power socket, for powering external devices with a cigarette lighter plug, e.g. for mobile phone charger or...

Very high quality universal 12v water pump made by Bosch.
Suitable for permanent long term use.

In scooter racing the mechanical water pumps...

Genuine Piaggio electronic speedo drive.

Peugeot Speedfight 2 Illuminated race style speedo face. The background can be switched between blue or green light with dimming...

Chrome universal horn.

*12V

Illuminated (glowing) race style speedo face. The inverter included in the package allows for illuminating the face in a blue or...