Aerox Brake Pads

Front Malossi Sport brake pads, Feature increased braking life compared to the original pads and in addition they supply a...

Aerox '97 onwards, Jog (all) - front only

some Aprilia SR50 (front and rear)

Standard Front Pads

Fits Piaggio/ Gilera engine scooters (not Zip) also Katana and SR50 with Katana engine

Brake Pads- fits Peugeot Speedfight both front and rear
Fits AJP calipers front and rear.

Replacement rear brake pads for Gilera Runner 125cc and Gilera DNA 125cc.

Please check the photo against your own before ordering.
Overall...

Malossi Brake Pads :

They were born on the racetrack, but they are perfectly suitable for the chaotic driving conditions imposed by our...

Malossi performance front brake pads for Heng Tong callipers.
Sintered pads are suitable for race use and are designed to run at higher...

Malossi Sintered race rear brake pads.
Sintered pads are suitable for race use and are designed to run at higher temperatures than standard....

Replacement front Malossi Sport brake pads for Peugeot Speedfight 1 and 2 liquid cooled (air cooled usually uses a different calliper but...

Malossi Sport brake pads feature increased braking life compared to the original pads and in addition they supply a greater braking power...

Motoforce racing sintered front or rear brake pads for Peugeot scooters.

Sintered pads are suitable for race use and are designed to run at ...

Aprilia SR50 rear brake pads, Up to 2003.

Standard pads

Fits Piaggio/ Gilera rear (where rear disc is fitted).
Also fits Piaggio Zip front

Replacement front brake pads for Malaguti F12 and F15 mopeds.

Fits 1997 on.

Stage6 Sport Brake Pads.
A long lasting brake pad designed and optimised for everyday use. Slightly softer than semi-metal or sintered...

Stage6 Sport Brake Pads.
A long lasting brake pad designed and optimised for everyday use. Slightly softer than semi-metal or sintered...

Stage6 Sport Brake Pads.
A long lasting brake pad designed and optimised for everyday use. Slightly softer than semi-metal or sintered...

Stage6 Sport Brake Pads. Aerox Rear.
A long lasting brake pad designed and optimised for everyday use. Slightly softer than semi-metal or...

Malossi MHR rear brake shoes for Malagutti and Chinese 50cc mopeds.

High performance carbon/ metal fibre mix linings for high temperature...

Malossi brake shoes have been perfected for the installation in the most important vehicles produced in Europe and Japan.
Malossi engineers...

Rear brake shoes.
Fits Piaggio/Gilera with rear drum. These are for 100mm diameter drums (these shoes are 20mm wide) and suitable for most...

High quality replacement Motoforce brake shoes for rear drum brake Peugeot engines.

These are a direct replacement for your old ...

High quality replacement Motoforce brake shoes for rear drum brake Minarelli mopeds. These are a direct replacement for your standard old...

 Rear brake shoes for Yamaha and Peugeot mopeds.

Brake caliper piston and repair kit for AJP brake calipers.

Please check sizes carefully before ordering

Pistons: 25mm diameter X 13mm...

Rear brake repair kit for Yamaha Aerox with Brembo brakes. 30mm x 17mm deep

*Check size before ordering.

Front brake caliper for Yamaha Aerox, Runner. Comes complete with brake pads.

This is a direct replacement for the standard part, choose...

Front brake caliper in black for Piaggio ZIP.

Check photo !Piaggio Part No. CM065704, CM076101

Black front brake caliper for Piaggio Zip front, also DNA rear, some Runner 125 2-stroke.
This is a high quality standard replacement part...

Rear brake caliper for Piaggio/ Gilera mopeds - this is the genuine Piaggio caliper finished in a gold paint, comes complete with brake...

Front brake caliper for Gilera Runner and Gilera DNA mopeds (Heng Tong type)

This is a genuine Piaggio caliper and comes complete with...

Stage6 R/T front brake caliper adaptor for the original fork mounts for use with Stage6 4-pot race calipers (see below).
Due to the clever...

This adaptor allows you to fit the Stage6 R/T 4-pot brake caliper to the front wheel of a Piaggio Zip SP (models with single-sided swinging...

Stage6 2-piston performance brake caliper from Stage6 equipped with oversize 32mm pistons.

This is CNC cut from solid aluminium and then...

Huge wavy saw front brake disc for Yamaha Aerox.
This wins the best looking brake disc hands down. 285mm 6 point floating disc with anodised...

Sex up your scooter with this very stylish Artek K1 230mm oversize brake disc kit.
Complete with white powder coated caliper adaptor to fit...

5 bolt hole fitting front brake disc.

Standard fitting front brake disc for Gilera Ice, DNA 50, Zip SP etc.

200mm X 96mm

Also fits all ...

5 Hole brake disc for Gilera DNA/ Ice, Piaggio Zip SP etc.

200mm X 96mm

Also fits all Gilera Runner VX/VXR up to '06.

180mm wavey brake disc for Peugeot Speedfight 1 and 2 mopeds.

Fits front and rear.Motoforce Part No. MF44.00401

Front or rear brake disc. Fits Yamaha Aerox, Aprilia SR50 and Piaggio Typhon 50cc.

190mm diameter

Standard replacement brake disc for Piaggio/ Peugeot/ Aerox scooters.
3 Hole fitting 190mm diameter.

Oversize floating 260mm front brake disc for Gilera Runner bikes.
An amazing upgrade over the standard disc !

*Note: Will only fit wheels...

Motoforce Racing wavy brake disc for MBK Booster/ Yamaha BWS mopeds.

A direct replacement for the standard disc but with stylish wavy...

180mm x 62.5mm - 3 hole brake disc for front or rear (countersunk screw holes)

For Speedfight 1 or 2 up to 100cc

Rear brake disc for Piaggio NRG power years 2004 - 2006. Will also fit Gilera Runner VX 125cc and VXR 180cc upto 2006.

Sizes: 220mm X 105mm...

Front brake disc for Piaggio NRG and Gilera Runner.

Sizes: 220mm X 58mm - 5 Hole

The new Stage6 Oversize MkII is the right alternative for those of you who prefer the classy look of a drilled disc to the wavy...

Small wonder that the Stage6 Monster Oversize brake disc in black steel is called like that: it has an enormous 260mm diameter, is mounted...

This Stage6 front brake disc has an enormous 280mm diameter, it is mounted at 10 floating points and comes in a cool wave design. Racing...

This is the first floating wave design brake disc made of black steel for the rear wheel (better braking characteristics than the stainless...

Wavy 240mm oversize brake disc from the Stage6 Styling Parts department. Not only does the wavy design offer racing style at its best, it...

TNT floating front brake disc for Yamaha Aerox mopeds, this is a 240mm oversized disc which will enhance the appearance and braking power...

Oversize 6 point floating front brake disc for Yamaha Aerox. 230mm diameter
Available in red or black.

This disc is larger than standard and...

Stylish uprated wavy front brake disc for Yamaha Aerox scooters.

BCD quality brake cylinder caps for Yamaha Aerox.

Stage 6 brake cylinder caps for Yamaha Aerox
CNC anodised, usual very high S6 quality
CNC machined from solid aluminium

*Sold singlyStage6 ...

M10 x 1.0 Brake bleeding valve.

This stylish and innovative part is a one way valve which can be fitted permanently to replace the standard...

Replacement brake caliper pad retaining pin for Gilera DNA 50cc mopeds and all Gilera Runner ('06 on).

Overall length...

Genuine disc brake bolts for Yamaha Aerox mopeds.

Sold singly with thread lock pre-applied ready to fit.

Brake light switch for Piaggio, Gilera, Peugeot, Yamaha mopeds.

Front brake light switch for most Chinese 4-stroke scooters both 50cc and 125cc.

This fits the most common Chinese scooters but check the...

Genuine front Brembo brake caliper pin kit.

M10 Copper washer, can be used for brake banjo bolts, oil pump bolts etc.

*Sold Singly

M10 x 1.25 bolt - 15mm long.

This is a brake disc bolt for use with brakes discs with recessed mounting bolt holes such as this one, but...

High quality Malossi racing brake fluid

Using steel braided instead of rubber hoses prevents excessive expanding of brake lines as you apply the brakes and therefore results in...

Brake light switch for Piaggio / Gilera bikes.

Larger type (13mm)

Complete brake cable for Piaggio rear drum brakes, fits most 50cc 2 stroke and 4 stroke versions.

Replacement brake caliper pad pin.

36mm to circlip, 5mm diameter. Circlip included.

Check the size of your old one before ordering!

Stage6 brake cylinder cap for Aprilia SR50 2005 onwards. CNC machined cap available in a range of different colours.

Note: Fits the front ...

Brake Reservoir Cover Stage6 Cooling Style

This version of the Stage6 brake cylinder cover is especially interesting due to the amazing...

Motofroce Racing universal brake cylinder and lever unit with 14mm piston cylinder.

Ideally suited for scooters and mopeds with downhill...

Yamaha Aerox 2-piece brake cylinder cap. These CNC caps are machined from aluminum with the top part anodized blue.
A unique and stylish...