Keep your cables running smoth and clean! Works on cable brakes, clutches etc.

This cable luber will displace moisture and internally grease the entire cable length.
Disconnect one end of the cable you want to  lube, clamp on luber and inject grease using a can of spray grease with the nozzle inserted into the fitting until the grease is...

Adjustable c spanner from Buzzetti.

Buzzetti crankshaft puller/ crankcase separating/ splitter tool (3 legs). This is a great tool for separating the crankcases without damage to the crankshaft or cases.

This method places the crankshaft pin under no stress and cannot affect the trueness of the crank.

Buzzetti Fuel tank/ Drip unit.
We use these in our workshop as a temporary fuel source - it also allows you to run petrol straight though to the carb without a vacuum tap.
Very useful when fault finding fueling problems !

*Also includes a on/off tap, hanging chain and a 1m long hose.

Steering head nut tool made by Buzzetti.

Inner diameter of tool 33mm outer diameter 45mm

For chains 420 and up.

Clutch holding tool. Choose either 39mm or 41mm across the flats.

(41mm fits older Aerox) 39mm tends to fit the newer bike models but measure your clutch nut to be sure

Fits most Yamaha and Peugeot bikes (not Piaggio)

Universal clutch holding tool

Clutch holding tool which will fit most 50cc scooters.