M10 x 1.0 Brake bleeding valve.

This stylish and innovative part is a one way valve which can be fitted permanently to replace the standard bolt which attaches the banjo connection at the end of your hydraulic brake hose to the calliper allowing you to bleed a brake system quickly and easily.

The vent consists of two parts incorporating a non-return valve. For venting and filling the upper part of the valve is released... simply squeeze the brake lever to allow air and brake fluid to pass through the vent. When the lever is released the valve automatically closes ensuring no air can leak back through into the system making brake bleeding an easy single man job!

Small air bubbles are purged by the flow and flushed from the system.
Just pump the lever until the system is bled!

Note* Fits callipers with a M10 x 1.0 fitting
(all common mopeds)