With scooters restricted via the CDI, it is possible to achieve higher RPMs and top speed by simply connecting a new ignition unit, such as...

With scooters restricted via the CDI, it is possible to achieve higher RPMs and top speed by simply connecting a new ignition unit, such as...

With scooters restricted via the CDI, it is possible to achieve higher RPMs and top speed by simply connecting a new ignition unit, such as...

Where a scooter or moped is restricted by the CDI, it is possible to achieve higher RPMs and top speed by simply connecting a new ignition...

With scooters restricted via the CDI, it is possible to achieve higher RPMs and top speed by simply connecting a new non-restricted...

This ignition coil from Motoforce Racing doubles the voltage to the spark plug.

The standard voltage for  a moped ignition coil is...

This regulator/ rectifier has a higher output than the standard OEM regulator whilst using the same original stator.

The charging voltage...

Motoforce replacement stator assembly for Piaggio purejet mopeds.
This will fit all the Piaggio 50cc fuel injected moped engines including...

Short temperature sensor for Yamaha Aerox/ Minarelli liquid cooled engines.

This sensor is M10 with tapered 1/8 pitch (use PTFE tape and...

Faulty electric chokes are often the reason for problems with cold starting!
We can offer a replacement choke from Motoforce that fits most...

Bargain replacement part from Motoforce for missing or faulty chokes, suitable for all 12mm, 17.5mm and 22mm PHVA and PHVB Dellorto...

On/ off general purpose 2-way toggle switch, can be mounted into the fairings and clamped into place with the small nut.Motoforce Part No. ...

High quality Motoforce racing HT lead.Motoforce Part No. MF12.00005

Racing ignition HT cable and cap in red.

*Please note the joiner piece in the photo is no longer includedMotoforce Part No. MF12.00000

5 metre lengths of electrical wire for general purpose moped wiring.

Available in choice of three different colors ...

In order to protect your scooters electric components, most electric circuits are equipped with a fuse!
If too much current flows, a metal...

Motoforce inline fuse holder.
Any new circuits or electrical devices you connect to your moped must be connected through a fuse in order to...

These Motoforce connectors are a handy and tidy solution for all custom electrical work on your scoot.
No matter whether you want to modify...

Replacement starter motor for Aprilia (2000-2003 with Katana engine) and Suzuki Katana.Motoforce Part No. MF90.190

Motoforce brings you this 12V power socket, for powering external devices with a cigarette lighter plug, e.g. for mobile phone charger or...