Standard replacement Motoforce variator kit from their ECO range for Yamaha Aerox/ Minarelli mopeds.
This is a complete replacement...

Standard style replacement variator kit for Yamaha Aerox/ Minarelli engines, made by Motoforce. Comes complete with rollers, backing plate...

Aerox/ Jog Malossi Multivar Variator

The Malossi Multivar is very easy to fit and to modify, It is developed in detail and for specific...

High-Speed Polini Variator kit. Includes Polini Race Belt, Variator, Rollers, and Torque Springs.

Includes 5.6 and 6.9g rollers, And a 22kg...

New from Motoforce, a complete sport variator kit consisting of the new version of the Motoforce Racing variator, a fan pulley and a Kevlar...

Polini Variator Kit

Polini High Speed variator kit for Minarelli engines/ Yamaha Aerox.

Includes Rollers, Clutch springs, Torque...

Stage6 R/T Oversize CVT system. Enlarged CVT systems that extend the complete transmission range are essential for race and midrace...

Stage6 Sport PRO variator kit.

This variator comes pre-adjusted for use with a 50cc cylinder and aftermarket exhaust.
It has however been...

Malossi Multivar 2000 variator kit for Yamaha Aerox 100cc bikes.
This kit is a great low cost performance mod over the stock ...

Motoforce Racing variator kit for Yamaha Aerox/ Minarelli engined scooters.
This is a great upgrade over the standard Aerox variator, the...

Front pulley and kickstart repair kit for Yamaha Aerox.

Outer Front Variator Pulley for Aerox/ Minarelli Engine.

A choice of Polini or Standard

*Star washer only included with ...

Artek front pulley unit for Yamaha Aerox/ Minarelli engine mopeds, complete with crank star washer.

This is lightened CNC machined...

BGM Pro drive face for Yamaha Aerox/ Minarelli scooter engines.

A great upgrade over the standard front pulley with a special non slip...

Genuine Yamaha outer front variator pulley for Yamaha Aerox 100cc mopeds.

This will also fit Mbk Nitro, and Ovetto/ Neos 100cc...

Koso CNC racing drive face
These are the same ultra stylish design as the Stage6 ones which reduce mass on the crank and consequently...

This is a replacement fan for the Stage6 R/T oversize variator kits.

It will fit both the Minarelli and Piaggio R/T kits.

Yamaha Aerox / Minarelli variator holding tool.

Distance between holes is 166mm

This is the most inexpensive tool to lock the variator or crank.

It can simply be threaded into the spark plug hole of the cylinder head....

SOLD INDIVIDUALLY ! 

Single variator guide bushes

Fits standard Aerox/ Minarelli/ Yamaha variators

TNT Tuning variator sliders for Yamaha Aerox/ Minarelli engine.

Comes as a set of 3.

Naraku variator spacer washers.
These fit in between the front pulley and the variator shaft and allow you to space out the front...

Polini Variator

Supplied as set of 3

Fits Polini Variators only (does not fit standard Aerox variator)

Replacement slider set for all Stage6 Sport Pro variator kits. Comes in a pack of 3. Stage6 Part No. S6-58ET001

These Stage6 washers fit between the drive face and the variator bush adjustment to adjust the distance between...

Aerox variator crankshaft pulley nut (Minarelli engines)

M10 x 1.25 RHMotoforce Part No. MF96.90001

Yamaha/ Minarelli standard plastic variator sliders.

Replacement set of 3.

Fits all Minarelli 50cc moped engines.Motoforce Part No. ...