Quality 10mm blade gasket scraper with wooden handle, a perfect tool for removing the old sealant/ gaskets when re-building your moped!

7 piece mini impact drive set, this is a perfect size set to keep in your seat box for any stubborn bolts or screws which won't come out !

Keep your cables running smoth and clean! Works on cable brakes, clutches etc.

This cable luber will displace moisture and internally...

Complete Buzzetti brake bleeding kit, comes with everything you need to make bleeding your brakes easy!

Adjustable C spanner from Buzzetti.

Buzzetti crankshaft puller/ crankcase separating/ splitter tool (3 legs). This is a great tool for separating the crankcases without damage ...

Buzzetti Fuel tank/ Drip unit.
We use these in our workshop as a temporary fuel source - it also allows you to run petrol straight though to...

Steering head nut tool made by Buzzetti.

Inner diameter of tool 33mm outer diameter 45mm

These circlip pliers are a very handy tool for any DIY home mechanic !

Long reach ideally suited for forks dismantling.
55mm internal reach.

This is a comprehensive universal circlip pliers set with 5 replaceable tips, covering a wide range of uses.

They can of course be used...

Clutch holding tool. Choose either 39mm or 41mm across the flats.

(41mm fits older Aerox) 39mm tends to fit the newer bike models but...

Clutch holding tool which will fit most 50cc scooters.

This digital multimeter from Motoforce measures current, voltage, resistance and battery voltage. It can test diodes and be used for...

3m long tube of flux cored soldering wire suitable for electical connections.Motoforce Part No. MF99.20162

Set of hose clamping pliers,

These are perfect when working on fuel/ oil/ coolant lines etc as it allows you to clamp the pipe closed and...

This is a professional set of jet reamers to enlarge the jet orifice.
For use where the manufacturer doesn't supply any intermediate sizes...

A jet gauge allows for measuring the difference between two jets, the scale ranges from 45 to 150.

Time and time again we've seen cheap...

Yamaha Aerox / Minarelli variator holding tool.

Distance between holes is 166mm

Aerox flywheel puller. Fits early Yamaha Aerox up to 2004 (Aerox's with manual choke)

M27 x 1.0mm LH thread

Buzzetti shock absorber spring compressor kit.

Red Motoforce funnel set available in a pack of 3 with small, medium, large funnels!Motoforce Part No. MF99.00118

We can offer you a professional tool set consisting of 7 screwdrivers and a voltage tester in a handy case.

The rubber coated,...

We can offer you this tap and die set from Motoforce to repair threads, e.g. on screws, bolts and studs. Don't forget to apply a lubricant...

Set of 3 tyre levers from Motoforce.

Makes changing tyres at home easy !

25 metre roll of neon coloured race duct tape.

This is very high strength adhesive duct tape suitable for making structural repairs (e.g....

This is the most inexpensive tool to lock the variator or crank.

It can simply be threaded into the spark plug hole of the cylinder head....

Set of 3 replacement medium 220 grit honing tool stones - 51mm long.

Perfect for use on 50cc 2-stroke cylinders.

Ignition spark tester with adjustable spark gap testing.

This is the only type of spark tester worth buying.

This invaluable tool allows...

This is a holding tool for the Stage6 R/T fan pulleys for both Piaggio and Minarelli moped engines. It allows you to easily undo or tighten...

New completely revised version of the Stage6 paddock stand.

On racing and custom mopeds the main stand is often removed, a paddock stands...

Spare inserts for our thread repair kits, these are high quality German replacement inserts available in both M6 and M8 thread...

Damaged threads in cylinders or engines can be a major problems, which is why a thread repair kits such as this one from Motoforce is an...

This is the special torx-key (with a hole) for removal of the security torx screws with pin (I-Torx), as fitted to inlet manifolds on...

This univerdal clutch holding tool locks the clutch/ torque driver assembly which makes for quick and straight forward removal of the...

These crimping pliers are used to strip and cut different electrical wires as well as to secure crimp connections of cables with blade or...

Kickstart shaft spring tool for fitting kickstart springs on Yamaha engine cases.