Genuine Yamaha water pipe clips for Yamaha Aerox/ Minarelli liquid cooled mopeds.

These are the little clips which secure the tiny heating...

Temperature sensor for liquid cooled Minarelli engines.
The long one is just a switch (for Aerox with just a temperature light)
The...

Yamaha Aerox water coolant pipe.
This pipe is the lower waterpump pipe which goes to the bottom of the radiator.
Genuine Yamaha moped part so...

Aerox Water Pump

Very high quality (metal) water pump cover, The meshed design makes this cover a must have tuning part !!

*This waterpump...

Water pump complete repair kit Yamaha Aerox / Minarelli 50cc.

*Always use coolant in your bike or the life of your waterpump will be...

STR8 Aerox water pump cover comes with impeller and waterpump assembly installed and lets you show what's inside your engine.
The big...

Aerox Water Pump Repair Kit- Aerox Waterpump Repair

Water pump repair kit for Yamaha Aerox / Minarelli

Note: you must use coolant and not ...

This is a terminal/ block connector for use with our Bosch 12v water pump.

Genuine Yamaha replacement water heater pipe for Yamaha Aerox/ Minarelli engines.

These are the little pipes which connect from the top of...

120cm long cooling hose/ water pipe. Fits most scooters.

90° bend both ends on 120cm version, single bend on 60cm version.

Internal...

Galp is a high quality cooling liquid which guarantees protection from corrosion, calcification, overheating and freezing temperatures of...

Waterpump seal for Yamaha Aerox/ Minarelli engines.

The aftermarket one addtionally includes the cover o-ring gasket

This is a special highlight from racing: a quick release hose coupling that allows you to remove the engine without water loss.
This is...

The Motoforce Racing fuel filter is equipped with a sturdy metal housing and a sintered bronze ball filter element.
These filters have...

Rock Oil KOOL engine coolant.
Total protection from - 38 to normal operating temperatures. A ready to use summer coolant, anti freeze and...

Not only is this SSP water pump a real eye-catcher, it also provides state-of-the-art technology. The water pump is precisely CNC machined...

Transparent cooling/ water hose. Universal fitting. Looks great when used with red Galp coolant.
Check internal bore size before ordering...

Cylinder head water caps for Yamaha Aerox/ Minarelli Malossi cylinders.

Standard Aerox has 2 small pipes running from the cylinder head to...

This is a complete vented waterpump and cover unit for liquid cooled Minarelli engines such as Yamaha Aerox, Yamaha Jog RR.

Consists of the...

Replacement water pump drive wheel for Yamaha Aerox/ Minarelli engines.

Radiator for Yamaha Aerox/ MBK Nitro.

195mm(width) x 205mm(height) x 35mmMotoforce Part No. MF29.505

Thermostat for Yamaha Aerox/ Minarelli liquid cooled engines.

Made in Italy.

Replacement water tank/ reservoir bottle for Yamaha Aerox/ MBK Nitro.

Genuine Water tank cap for Yamaha Aerox - also fits Piaggio