This will restrict the revs of your engine to a preset limit determined by yourself and can therefore be used as a speed...

This ignition coil from Motoforce Racing nearly doubles the secondary voltage.

The standard ignition voltage of the original ignition coil...

This rev limiter is a clever way to restrict your scooter. It engages a rev limiter automatically whenever the engine is turned off. To...

Universal fitting Motoforce racing HT coil. 1 pin coil.
Fits most common 2 stroke and 4 stroke 50cc bikes, e.g. Yamaha Aerox

*Please check...

Indicator/ flasher relay. Available in 2 pin and 3 pin

LED indicators bulbs are much lower wattage than conventional bulbs. Consequently...

An easy alternative to installing an LED indicator relay, These resistors are simply connected in parallel to each indicator, creating...

Starter relays for almost all mopeds.

Choice of connector pin layout, check photos to select yours.

Universal heavy duty starter relay 150A.

This starter solenoid is fitted to virtually all Chinese scooters, motorbikes, quads etc.....

Regulator for Minarelli engines. Yamaha Aerox up to 2003
Check picture, some mopeds after '03 use this regulator instead.

Complete flywheel and stator plate assembly for 50cc Chinese 4-stroke mopeds.
This fits virtually all modern (GY6 type) Chinese 4-sroke...

Replacement stator plate for Peugeot horizontal engined mopeds.

Voltage regulator/ rectifier for Yamaha Aerox '03 onwards. (Check picture)

Check picture, some mopeds before '03 use this...

Koso 90 degree, 150cm exhaust gas temperature sensor, for use with the Stage6/ Koso EGT gauges.

These temperature sensors allow measurement of the cylinder temperature of air-cooled engines using the Stage6 Rev Counter & ...

Koso temperature sensor to fit Koso DB02's and Stage6 speedos.
This is for Piaggio liquid cooled engines and has a M10 x 1.25mm...

High quality automatic choke unit for 4-stroke made-in-China mopeds.

Fits Piaggio 50cc 4-strokes and all Chinese 4-stroke mopeds both 50cc...

Universal Automatic Choke Unit

Replacement automatic electronic choke unit for most 50cc scooters/ mopeds.

Fits: Piaggio/ Aerox, Minarelli,...

Universal on/ off SPDT toggle switch with cover and LED on/off indicator light.

For use with any custom application which requires an on/...

High-gloss aluminium pilot-style switch panel equipped with 2 control lamps, push button, toggle switch and toggle switch with cover.

Can...

Front brake light switch for most Chinese 4-stroke scooters both 50cc and 125cc.

This fits the most common Chinese scooters but check the...

On/ off general purpose 2-way toggle switch, can be mounted into the fairings and clamped into place with the small nut.Motoforce Part No. ...

Stage 6 switch unit. This switch unit is a very high quality finish state-of-the-art product, CNC milled from aluminium!
Connections...

TNT Tuning lanyard kill switch.

This is ideal for race scooters. Attach it to yourself and it will of course kill the engine as soon as the...

High quality Motoforce racing HT lead.Motoforce Part No. MF12.00005

7.5mm diameter Naraku HT cable.

This is sold in 1 metre lengths and comes in a bright racing orange colour.

Waterproof NGK spark plug resistor cover.
Maximum heat resistance.
Maximum voltage resistance.

NGK spark plugs. Select the sparkplug you want from the drop down box above.

High quality replacement red rubber spark plug cap for liquid cooled mopeds - universal fitting.

For full waterproofing loop a small cable...

Fits almost everything air-cooled.

Suitable for the spark plug tip shown in the photo (or just unscrew the spark plug tip from...

Selection of high quality Motoforce spark plug caps.
All connectors have a 90° angle and are made of rubber or plastic.Motoforce Part ...

TNT Tuning HT cable. Universal 530mm long

5 metre lengths of electrical wire for general purpose moped wiring.

Available in choice of three different colors ...

In order to protect your scooters electric components, most electric circuits are equipped with a fuse!
If too much current flows, a metal...

Inline fuse holder with fuse, Comes with spare 15A fuse.

Motoforce inline fuse holder.
Any new circuits or electrical devices you connect to your moped must be connected through a fuse in order to...

These Motoforce connectors are a handy and tidy solution for all custom electrical work on your scoot.
No matter whether you want to modify...

Lithium 4L-BS battery, this is a very high quality low maintenance long lasting sealed battery.
Can be recharged to 90% capacity in just 6...

LUCAS Moped Battery - All scooter batteries are either supplied with an acid pack or are pre-filled and sealed.

We have tried a large...

Oxford essential battery charger/ optimiser for 12v batteries.

Recovers deeply discharged batteries.

Automatically assesses and...

6v/12v Scooter Battery charger.

Comes with Crocodile clips and Battery terminal connectors.

Starter motor unit and cable for all Chinese 50cc 4-stroke mopeds (GY6).

Fits 139QMB, 139QMA engines.

Also fits Peugeot V-Clic, Vivacity...

Motoforce brings you this 12V power socket, for powering external devices with a cigarette lighter plug, e.g. for mobile phone charger or...

Very high quality universal 12v water pump made by Bosch.
Suitable for permanent long term use.

In scooter racing the mechanical water pumps...

Ignition spark tester with adjustable spark gap testing.

This is the only type of spark tester worth buying.

This invaluable tool allows...

Chrome universal horn.

*12V