Budget covered racing air filter in the style of the Malossi E5 filters.

This filter has a connection size of 35mm but also includes an...

Comprehensive replacement oil seal kit for Peugeot mopeds.

Consists of both crankshaft oil seals plus the main gearbox oil seals.

note: ...

Cylinder head bolt, nut set available in M6 or M7 thread 13mm long.

Choose M6 thread for all Piaggio based 50cc moped engines.

Choose M7...

Motoforce cylinder head for air cooled 50cc Peugeot mopeds (40mm cylinder bore).
Fits vertical engines such as Peugeot Speedfight, Trekker...

Cable choke conversion kit for Dellorto PHBH and PHBL.

This kit is designed to allow you to use a remote choke lever and choke cable (such ...

This mounting kit allows you to run a regular Dellorto carb on your original manifold.
This a complete kit including connector rubber,...

These carburettor needle sets from Motoforce Racing allow for better fine tuning of your Dellorto PHBG/PHVA/PHBN carburettors.
Each of the...

Manual choke kit for Dellorto PHBG carbs. *Pull type choke.

Dellorto 5mm jet set. Contains 10 jets

Dellorto 6mm jet set. Contains 10 jets.

Replacement needle height adjustment clip for Dellorto carbs.

For use when your original one has pinged off across the garage somewhere.

Dellorto PHBG manual cable choke conversion kit. This kit lets you use the Stage6 and Polini cable choke kits on all Dellorto PHBG carbs.

Float bowl gasket for Dellorto PHBG carbs, this will also fit our universal 21mm and TNT 19/21mm carbs.

This is the gasket which sits...

Complete carb overhaul/ repair kit for Dellorto PHBL carbs.

This is a very comprehensive complete repair kit with all necessary gaskets and...

Genuine replacement Dellorto float bowl. Type 2696, 2695.

4 bolt hole fitting with a easy screw access hole to change your jet.

Dellorto Stage6 carburettor jet kit.
10 main jets are included in this kit, stored in a neat transparent box.

These 5mm main jets will...

Dellorto type oil pump controller for Peugeot, regulates the 2-stroke oil supply depending on engine rpm.
This is the 8 pin type which...

Heavy duty durable protective rain and weather cover for scooters, mopeds and small motorbikes.

Features elastic tie down straps, heat...

HD disc lock with weatherproof cover and carry pouch.

6mm pin for all disc brakes with holes of 6mm or bigger.

Standard replacement Motoforce drive belt for all Peugeot 50cc mopeds.
A high quality belt which is a direct replacement for your old worn ...

Bargain replacement part from Motoforce for missing or faulty chokes, suitable for all 12mm, 17.5mm and 22mm PHVA and PHVB Dellorto...

Replacement auto choke unit for Dellorto carbs, U Clip type.

This will suitable all 12mm, 17.5mm and 22mm PHVA and PHVB DellOrto carbs and...

3m long tube of flux cored soldering wire suitable for electical connections.Motoforce Part No. MF99.20162

Puncture repair kit.
This is perfect if you get stuck somewhere with a flat tyre and need a quick repair as it allows you to fix a puncture...

Endy powerpipe available in Chrome or Lacquered. Available with carbon end can.

*comes with rollers !

If you want this pipe derestricted ...

Epoxy Steel Chemical Metal (4 minute quick-set).

Automotive grade easy to use two-part adhesive and filler
Bonds and repairs almost any...

Universal M6 exhaust bolts, can be used with a 10mm socket/ spanner or with a Philips screwdriver. Available in a standard steel bolt or...

Add this item to your shopping basket if you want your exhaust to be derestricted for you.

Please be aware that restricted E-Marked...

Silencers are subject to great stress, from time to time they have to be completely replaced or require new packing material. Motoforce...

Exhaust stud, nut and gasket set - this is the perfect kit for mopeds and includes the 3 main items you will need when fitting a new...

Fairing Indicators, perfect for Aerox after fitting a handlebar conversion. Fits flush in the front fairing

Size: 70mm x 35mm

Body panel screw and clip set for Yamaha Aerox, MBK Nitro.

* Will fit other bikes.

20 screws and 20 clips in a pack.

Aluminium inlet manifold and rubber mount for Peugeot Speedfight upright mopeds  50cc.

You need this to fit a regular carb to your...

Transparent float bowl allowing you to see the fuel level the inside the carb. Available in three different colours.

* Fits all...

Brake lever grips in a choice of six colours. Consists of an extra-soft foam rubber. Length is 100mm, outer diameter 20mm, inner diameter...

Replacement front brake lever for Peugeot mopeds using an AJP front brake system.

Fits most Ludix, Speedfight 50cc, Trekker, Vivacity etc.

Simple and inexpensive replacement front shock absorber (where used) for Peugeot Speedfight 1 & 2 - fits both 50cc and 100cc.

A great...

Brake Pads- fits Peugeot Speedfight both front and rear
Fits AJP calipers front and rear.

Universal 5 metre long length of high quality clear fuel tube.

5mm internal diameter, 10mm external diameter.

Uprated fuel pump, operates from the carburettor or inlet manifold vacuum pipe.
The output is 14ltr/h, which is more...

Brass fuel vacuum inlet with M6 thread.
For mounting into inlet manifolds which don't have a vacuum connection.

Galp is a high quality cooling liquid which guarantees protection from corrosion, calcification, overheating and freezing temperatures of...

Replacement aluminium silencer end can for Giannelli Next exhaust systems.

Ready to bolt straight on!

3D Gilera Runner gel badge sticker.

GO Fast energy drink sticker set

GO-Pro racing gloves are a light weight mesh construction glove with a hard shell carbon knuckle and reinforced padded thumb and palm...

Gurtner jet set. Contains 10 jets

Motoforce Racing jet pack for Gurtner carbs.
each pack contains 9 jets...

choose between sizes 54 to 72, or 78 to 100.

78 - 100 pack...

Following on from the Black Diamond wheel range this is the "Black Ghost" for Yamaha Aerox.
Will also fit Peugeot Speedfight disc/disc with...

Gyronetics invisible valves kit.

This kit fits all tubeless moped wheels and replaces your existing boring rubber valves for an almost...

Gyronetics Spider rims for Yamaha Aerox.
Will also fit Peugeot Speedfight disc/disc with optional wheel adaptors (see spare parts...

Halogen headlight bulb 12v 35w/35W - Blue tinted.

Please check the photo against your old bulb before ordering.

 ProGrip 732 series handlebar grips.

Two-tone bright and eye catching colour scheme, choose between the colours below

Budget handle bar stem for Peugeot. Fits all our TNT/ STR8 handlebars

35/35W headlight bulb. Dipped and main beam filaments.
Very common moped headlight bulb. Fits Aerox amongst others.

Also available in high...

P26S base single filament headlight bulb.
This is a very common moped headlight bulb.

Available in tinted blue, Halogen and Super-White...

In tuned engines, silencers have to endure a lot of strain and so should be repacked or completely replaced after a while.
Hebo offers high...

Very long lasting high temperature exhaust paint that gives a perfect protection against rust.

Set of hose clamping pliers,

These are perfect when working on fuel/ oil/ coolant lines etc as it allows you to clamp the pipe closed and...

High quality Motoforce racing HT lead.Motoforce Part No. MF12.00005

Indicator/ flasher relay. Available in 2 pin and 3 pin

LED indicators bulbs are much lower wattage than conventional bulbs. Consequently...

Inline fuse holder with fuse, Comes with spare 15A fuse.

Specialist size inner tubes for mopeds/ scooters.

Complete intake system from Stage6.

Teflon-coated intake manifold with oil and vacuum connections, gaskets and a vulcanized reed block.
The...

This is a professional set of jet reamers to enlarge the jet orifice.
For use where the manufacturer doesn't supply any intermediate sizes...

This Motoforce jets gauge allows for accurate measurement or comparison of jet orifices or any other small bore.

It is intended for all...

Replacement main jets for Keihin PWK carbs. Sizes from 85 up to 150