PedParts UK

Free Shipping on all orders over £59.99 (Mainland UK only)

0 items 0.00

Checkout

Peugeot Ludix Body Panels, Styling Parts

Sort parts by:

Showing parts for:

Keywords

This category includes standard and aftermarket body panels, fairing kits and individual panels. It also includes styling parts to visually tune your scooter and make it stand out from the crowd!

body panel kits

5 piece fairing set for Peugeot Ludix mopeds. This kit includes the main front panel, left & right side panels, headlight surround,...

Pay: £89.95

In stock

InfoMore Info

TNT

body panels (separate)

BCD Evo vent spoiler for Peugeot Ludix Blaster. Comes with full fitting kit.

Available in white or black.

Pay: £30.59

In stock

InfoMore Info

BCD

Universal handlebar spoiler for scooters that have had a bar conversion. Gives your bike a tidier look hiding any unwanted wires from...

Pay: £26.95

In stock

InfoMore Info

BCD

Stylish handlebar support mounting panel for the square TNT or Koso digital speedos.

If you have a handlebar conversion this will mount...

Pay: £6.95

In Stock

InfoMore Info

KOSO

Peugeot Ludix belly panel Evo spoiler. As an alternative to the two-part underbody spoiler from BCD's Extreme line, we can also offer you...

Pay: £33.65

In stock

InfoMore Info

BCD

Peugeot Ludix side vent EVO panels. Fits at the front of the belly panel. Available in white or black.

Fits Ludix Blaster

Pay: £32.63

In stock

InfoMore Info

BCD

Carbon front mudgaurd for Peugeot Ludix mopeds with a 14" wheel.

Pay: £27.95

In Stock

InfoMore Info

TNT

handlebars & stems

Artek branded handlebar stem For Peugeot Ludix mopeds, this is a perfect stem for fitting a handlebar conversion to your bike and is...

Pay: £28.45

In stock

InfoMore Info

Artek

Short black BCD bar pad for all handle bar conversions.

Pay: £8.83

Out of stock

InfoMore Info

BCD

High quality downhill handlebars in red from BCD. Supplied with a free cross bar protector pad (either black or white)

*Length 630mm -...

Pay: £38.95

Out of stock

InfoMore Info

BCD

BCD Engineering Series Handlebar Ends.

Stylish ends for handlebars with internal diameter of 15mm

Pay: £10.95

In stock

InfoMore Info

BCD

Universal handlebar hand guard protectors.

Mainly found on off-road motorcycles, but works well for scooters which have had a handlebar...

Pay: £13.95

In stock

InfoMore Info

TNT

Universal handlebars perfect for moped handlebar conversions. Anodized Blue with powder-coated black cross bar. Knurled on the left to ...

Pay: £19.95

In Stock

InfoMore Info

Universal handlebars perfect for moped handlebar conversions.
They are 810mm long and have a 50mm rise.
Note that 810mm is extra wide !! Some...

Pay: £14.45

In stock

InfoMore Info

Replay

Just what your downhill handlebar needs: a Stage6 bar pad. In classy black, sporting the well-known Stage6 logo. Not just stylish but also...

Pay: £2.39

In Stock

InfoMore Info

Stage6

STR8 visual tuning downhill handlebars. The perfect match with our STR8 and TNT downhill stems.

*Available in a choice of...

Pay: £26.95

In stock

InfoMore Info

STR8

 Lightweight aluminium anodised handlebars suitable for scooter bar conversions

Overall width 64cm, 22mm diameter at mounting points.

Pay: £19.95

In stock

InfoMore Info

TNT

TNT Streetbike downhill handlebars.

These are a universal 22mm clamp fitting with a flat reinforced top bar for added strength instead of...

Pay: £29.95

In stock

InfoMore Info

TNT

Italian made top quality Tommaselli Drag race style handlebars.

640mm wide with a 22mm clamp size so will fit most handlebar stems.

Pay: £38.95

In Stock

InfoMore Info

mirrors

Retro style F1 mirrors from BCD. Described by them as being "shaped like an airplane wing".  Easily adjustable with a bull-joint...

Pay: £21.95

In stock

InfoMore Info

BCD

Pair of high quality CNC carbon matt style mirrors made by BGM.

These are the best quality CNC mirrors we could find !

Comes with a 8mm...

Pay: £42.71

Out of stock

InfoMore Info

Black lightweight and flat enduro mirrors for all types of mopeds & scooters.

Rigtht - M8x1.25 Normal thread.

Left - M8x1.25 Reverse...

Pay: £7.95

In stock

InfoMore Info

Vicma

Orange lightweight and flat enduro mirrors for all types of mopeds & scooters.


Supplied with handlebar clamp connection.

*Left or right...

Pay: £9.95

In stock

InfoMore Info

Vicma

bolts & fixings

Pack of 50 asssorted black powder-coated screws from Motoforce.

Universal fitting.

20x M5x20mm
10x M5x10mm
10x M4x20mm
10x M4x16mm

Pay: £9.34

In Stock

InfoMore Info

Motoforce

This is a genuine Piaggio universal self tapping screw spring clip (otherwise known as a spire clip!)

As fiited to many many scooters for...

Pay: £0.35

In Stock

InfoMore Info

Piaggio

Body panel screw and clip set for Yamaha Aerox, MBK Nitro.

* Will fit other bikes.


20 screws and 20 clips in a pack.

Pay: £6.08

In stock

InfoMore Info

TNT

Panel clip set. Pack of 10.

These have threaded nuts (M6 thread) for use with bolts/ screws rather than self tappers.

Pay: £5.95

In Stock

InfoMore Info

Motoforce

Genuine Piaggio universal M6 spire clips as fitted to many scooters for securing the body panels.

These are threaded for M6 size bolts...

Pay: £0.68

In Stock

InfoMore Info

Piaggio

Motoforce short screw and fairing clip set. M4 x 10mm. Includes 20 screws and clips.
NOTE:- These screws are quite small (approx 3/8" long),...

Pay: £7.55

In Stock

InfoMore Info

Motoforce

Pack of 10 self tapping spire clips, these are used on most moped frames to hold secure panels etc.

Pay: £2.86

In Stock

InfoMore Info

Miscellaneous

Boost bottle. Blue, Red, Polished Aluminum all made by PM Tuning. The black one is made by BGM.

Pay: £18.32

Out of stock

InfoMore Info

Brake lever grips in a choice of six colours. Consists of an extra-soft foam rubber. Length is 100mm, outer diameter 20mm, inner diameter...

Pay: £3.95

In stock

InfoMore Info

STR8

High quality reflective 6mm rim tape in a range of colours.
Complete with applicator tool.

*Enough for both wheels.

Pay: £6.95

In stock

InfoMore Info

 Ninja Star Tax Disc Holder- CLEARANCE PRICE!!!

Only Green Left!!!

Pay: £3.95

In Stock

InfoMore Info

An exclusive part for you from BCD Engineering! Ugly brake reservoir covers are now a thing of the past. Now you can get these beautiful...

Pay: £8.63

In stock

InfoMore Info

BCD

TNT Tuning smoked speedo screen to fit Peugeot Ludix Blaster

Pay: £2.95

In Stock

InfoMore Info

Universal rim tape, sold in a 10 metre long roll.

Available in a range of different colours and two widths to suit most types of...

Pay: £4.95

In stock

InfoMore Info

Stage 6 switch unit. This switch unit is a very high quality finish state-of-the-art product, CNC milled from aluminium!
Connections...

Pay: £20.95

In stock

InfoMore Info

Stage6

Stage6 SSP style boost bottle.
Universal fitting available in blue or chrome.

This boost bottle from Stage6 is especially designed for 70cc...

Pay: £22.45

In stock

InfoMore Info

Stage6

Universal brake and clutch lever grips from Stage6 in black or orange.

Not only do they look great, the soft foam rubber also offers firm...

Pay: £2.75

In stock

InfoMore Info

Stage6

This Stage6 adaptor allows you to fit our Stage6 mirrors onto Peugeot mopeds with which normally have long bolt through mirrors (e.g....

Pay: £3.45

In Stock

InfoMore Info

Stage6

M10 left hand mirror adaptor for Stage6 F1 look mirrors.

Pay: £3.45

In Stock

InfoMore Info

Stage6

M10 right hand mirror adaptor for Stage6 F1 look mirrors.

Pay: £3.45

In Stock

InfoMore Info

Stage6

Stage6 rim stickers in black and white on 3M reflective adhesive film for all 10 and 12/13 inch rims.
Each set consists of four rim...

Pay: £7.10

In stock

InfoMore Info

Stage6

These STR8 valve caps are perfect for adding the finishing touch to your moped. The "Bullets" are shaped like ...um...well... bullets and...

Pay: £3.95

In stock

InfoMore Info

STR8

TNT Tuning number plate bracket for Piaggio engines and Peugeot Ludix

Pay: £19.91

In stock

InfoMore Info

TNT

This set allows you to build an individual soundboard for your scoot! 

The switch included in the delivery switches the system on and ...

Pay: £39.95

In Stock

InfoMore Info

White brake cylinder caps for Peugeot mopeds, comes complete with fitting screws.

A great upgrade from the standard plain caps fitted from...

Pay: £10.95

In Stock

InfoMore Info

Replay
LeftRight